I made another bit of a splurge purchase last weekend. After visiting with my grandmother, I walked over to a nearby toy store (Turtle Pond Toys inside University Plaza for those of you who know the town of Dundas).
This is going to be about one meter tall when built.
Here’s the rub though. I now have two rather large models that remain in their boxes. The Elizabeth Tower (aka Big Ben) and this one. I simply do not have suitable room to build them or display them. There are other large models that I’d like to buy (Tower Bridge for one) but that only exacerbates the problem of space.
It is times like this that I miss my house in Texas and the bedroom dedicated solely to LEGO models…
Procrastination got the better of me (again). I didn’t take a photo of the finished model until this past Sunday.
As usual, I used my 50mm Prime lens but I don’t have any depth of field on this one. Truth be told, I am running out of room here to display these models. I’ll have to invest in a decent bookcase or shelving unit – but that would have to wait until I move some place better.
Moving is something else that I am procrastinating! I hate moving nearly as much as I hate this building I am in. But I digress.
This was an interesting model to assemble. The twisting Shanghai Tower is the most eye-catching and the way it goes together in Lego is just as cool. Ingenious!
A month ago, I sensed that the next Lego Architecture model would be the Shanghai skyline since that was being used in the website navigation graphics. Not exactly The Amazing Kreskin there with my clairvoyance! Sure enough, Shanghai is the newest in the Architecture series.
Just as sure, I bought it as soon as I saw it! Hopefully I’ll get it assembled before the weekend (it has been crazy busy this week).
As I wrote the other day, I decided to finally finish off my Lego Architecture models. To my knowledge, I have every Lego Architecture model that has been released.
The Solomon R. Guggenheim Museum was first offered several years ago. It was only 204 pieces and it captured the artistic feel of the building – which is something that I love about the Architecture series. The Lego Group re-released a new version last year that more than tripled the brick count at 774 pieces.
The new model is a closer representation of the real structure.
Here are the two models side-by-side. New on the left and older version on the right.
If you click through to my Lego Models Flickr album, you can also see my photo of the new model in greater detail.
I want to move to a better apartment in the near future, so I probably won’t embark on any new construction for awhile.
Well, the world survived the first year of President Orange Dumbfuck. For the sake of my American friends and the rest of the world, I certainly hope that early 2018 sees special counsel Robert Mueller file charges of treason. Cheeto Hitler has done incalculable damage to the United States; it will be interesting to see if their system of checks and balances can self-correct.
The only good thing to come from this presidency is the exposure of the hypocrisy of evangelical Christianity. Much (but not all) of this crowd supports the Painted Shit-Stain in the White House. The USA is moving on culturally and leaving these fossils behind though. I am hoping that this is their death throes.
I’ll aim to spend today building my last – for now – Lego Architecture model. The Solomon R. Guggenheim Museum. For the time being, I have all of the Architecture sets.
Intriguingly, I snipped this image from the Lego website navigation menu. This shows a skyline set – Shanghai I think – that is not available. This might be coming soon.
I will keep my eyes peeled for that.
I did acquire the Lego Creator set for Big Ben to compliment the Architecture set. This a huge set and I think it will make for a wonderful juxtaposition.
In just a few hours time, LightWave 2018 will be available! I cannot wait to start playing with it and learning the new physically-based rendering system. I’m really hoping that it makes for a seamless transition between Allegorithmic Substance and LightWave.
I had a new boss start during 2017 and I enjoy working with her. Hopefully 2018 sees some solid improvements with my employment. The DBA team works well together and Elena is a champion manager.
Lastly, Photoshop World 2018 is coming along with the 41st FFRF National Convention in San Francisco. There is much to look forward to.
I finally built this model yesterday after much procrastination.
As usual, I used the 50mm prime lens to get a shallow depth of field. The fake sunset light was done by turning off the overhead ceiling light and using the LED floor lamp. I also included a diffused Lume Cube.
Apologies for the bottle of Southern Comfort in the background, but I am running out of suitable display space for these models.
Thank-goodness for the tripod! I had to fully extend the legs to get this angle.
There was much that I did not know about the Arc de Triomphe. This is another aspect of the Lego Architecture that I really enjoy – the instruction booklets are filled with interesting facts about the history and construction of each real-world building.
The re-designed Solomon Guggenheim Museum is still in its box. But I’ll try to begin that build this week.
I have a really big Lego model on the way. More on that later…
I got way ahead of myself this time. Although this set suffered a shipping delay, once it arrived here two days ago, I built it right away. I have yet to build the new Guggenheim Museum or the Arc de Triomphe model!
But I could hardly help myself. I’m a space geek as well as a Lego geek. The idea of this set is a really wonderful one too.
I am sincerely hoping that Lego produces more commemorative sets like this. I love the idea of honouring pioneers in various fields or the unsung heroes that few people know about.
I completed the model on Friday night, ahead of an expected busy weekend.
But I’m only getting to writing this now.
In spite of its size, it was a fairly simple model to build. The symmetric nature of the structure leant itself to fast building. The slowest aspect to the build was the large number of 1×1 flat pieces making up the surrounding property and parts of the walls.
The central dome can be removed. Beneath it is a nice representation of the National Statuary Hall. That’s a nice touch of detail I think.
I’ll have to buy the remaining two Lego Architecture sets soon.
I finally started work on the U.S. Capitol Building model. I’ve had this set for a few months now but the Thanksgiving long weekend is what gave me the kick that I needed.
This is a huge set as far as Lego Architecture goes. I’m not sure if it is bigger than Robie House or not. Those two models are definitely the two largest in the series.
Although not an ideal location, I am typically building these at my small kitchen table. Usually, this table is reserved for my work laptop and monitor. And yes, I do often drop pieces on the floor.
Here is a cellphone shot of the progress thus far. Sorry about the overhead glare from the ceiling light.
Yesterday, I finished up the remaining work on the Buckingham Palace Lego model.
As is my custom, I took a few photographs of the completed model and experimented a little bit with the lighting and lenses. The first photo was face-on and I used both Lume Cubes here.
I balanced a diffusion bulb modifier against a Lume Cube off to the photo’s right side. I only have a single mounting bracket for the Cubes, I’ll have to remedy that oversight. The second Cube used the mounting bracket to hold the hexagon grid and a flat diffusion modifier. That was probably redundant on my part, but that is what experimentation is for.
I used the kit lens, so I could only get f/5.6 focal depth. Aperture priority mode caused for a rather high ISO. Because of that, I had to use Topaz Labs De-noise to clean up the image noise.
I switched to the 50mm prime so that I could get a shallower focal depth and moved the camera higher. I specifically reduced the ISO value so that it would not be noisy.
There was only one Lume Cube plus the ambient room light illuminating this shot. I used Topaz Labs Lens Effects to create a heavy vignette.
My friend Cris suggested using card stock to create backdrops for these photos. That’s a good idea and one worth exploring. If nothing else, I could use them as mattes and do things like sky replacement in Photoshop.
Next up in my collection is the U.S. Capitol Building model. That will take quite a long time to build I expect; it appears to be nearly as large as the Robie House model.
I still need to buy the re-designed Guggenheim Museum and the new Arc De Triomphe models. I will probably end up getting those and finishing them before the Capitol.
Last night I finished building the re-designed Burj Khalifa Lego model. Even before starting the build process, I knew that my photo would have to be both models side-by-side.
The original Burj Khalifa primarily used the 1×1 cylinder pieces. It was released in June 2011 and captured the essence of the building. This essence or artistic impression is what draws me into the Lego Architecture series. The first designer in this series – Adam Reed Tucker – calls himself an artist. Lego is simply his medium.
I had mixed feelings when I saw that Lego had re-designed Burj Khalifa. They also re-designed the Solomon R. Guggenheim Museum model. In both cases, the models are bigger and more detailed than the original release. I felt like this was taking away from the artistic impression of the series.
Having built this model, my misgivings have vanished. I love both models for what they are.
A note about this picture. This marks my first use of my Lume Cubes to light the scene. The light is brighter and whiter than when I depended on my two, weak, apartment lights. Also, the Lume Cube is a tough sucker!
I had the camera setup with the cable-release. I switched on the Lume Cube and was holding it in a position that I liked… When it slipped from my fingers and tumbled about five feet to the floor. A naughty word escaped my lips. The impact sound made reminded me of glass cracking.
The Lume Cube stayed illuminated. I don’t see any obvious damage to it at all. Phew!
I’ve been on quite the Lego kick lately. After finishing the Chicago Skyline model I only waited a few days to buy the re-designed Burj Khalifa model and the Buckingham Palace model.
I have the first Burj Khalifa model. It is rather tiny and uses the 1×1 cylinder pieces primarily. It captures the essence of the structure – which is what I love about the Lego Architecture series. This new model is the tallest Lego Architecture and uses pieces that more accurately reflect the look of the real building.
After work today, I rushed over to Henry’s to see if they had any Lume Cubes. They had the lights but none of the accessories. So I bought a two-pack – they are charging up now.
I’ll have to get a proper hot-shoe flash kit for the camera eventually. I hope these Lume Cubes tide me over in the mean time and let me get a little more creative with lighting.
This marks the completion of all my Lego Architecture models. Some of my earlier models are still boxed away since I moved from Texas.
Here is the Chicago and New York City skyline models together. I cannot think of two more iconic American cities – indeed, these are the only two American cities in the skyline series.
The model showcases Big Red, the Willis Tower, the Wrigley Building and the John Hancock Tower. Also featured is the Cloud Gate (aka The Chicago Bean) and the Michigan Avenue bridge – I’ll guarantee that you have seen that bridge in movies.
I am not sure if Lego is going to release more skyline models. I hope that they do. Maybe they could re-create Toronto?
The newest Architecture model is the Arc De Triomphe. But I have older models to acquire first.
I’ve been on-call at work this past week. Normally that ends on Friday at noon; however, I am covering my colleague until Sunday at noon. And a lot of stuff has been breaking at work…after hours…
Ah well. It’s what I signed up for. At least I was able to finish the London skyline Lego model!
The main features are obviously the Tower Bridge and The London Eye ferris wheel. But the National Gallery and Nelson’s Column are there, nestled behind and beside the Elizabeth Tower – aka “Big Ben” which is actually the name of the main bell in the tower.
The London Eye isn’t quite a nice circle. The plastic tubing frame doesn’t play nicely with physics!
I used a shallow depth-of-field again; the 50mm prime lens at f/2.5. There was some minor straightening with Camera Raw and then I used Topaz Clarity for some final sharpening adjustments.
So the Chicago Skyline remains. That looks to be a fairly simple model to build. I’ll probably buy the Buckingham Palace and U.S. Capitol models soon as a birthday present to myself.
Now if the on-call system stays quiet for the next 24 hours…
I put my three newest Lego skylines under my booze shelf. I finished the Sydney skyline a few days ago but the photos I had taken didn’t turn out as I wanted. So I opted for this.
My Lego Models Flickr group also includes the New York City skyline. That image is not properly white balanced though.
I bought the Chicago model. That completes the skylines series (so far anyway). I still need to get Buckingham Palace, the U.S. Capitol and the two re-designed Burj Khalifa and the Solomon R. Guggenheim Museum models.
I finally built it!
I finished this model on Sunday evening, but waited until now to blog about it. Maybe I can set a personal record with blog posts this month!
The image was taken with the 50mm f/1.8 lens using f/2.0. I focused on the pyramid in manual mode – the first time that I have not used auto-focus actually.
As previously mentioned, the next builds will be the Sydney and London skylines. The Chicago skyline will be acquired in the near future.